708-2L-00300 hydraulic pump for Komatsu PC200-7 PC200LC-7 PC210-7 PC220-7 PC220LC-7 PC230-7 PC240LC-7K PC270-7 PC290NLC-7K excavator
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+86 199 246...
+86 199 2461 6345
China
China
China
China
China
China
China
China
China
China
China
China, 合肥市
China
China
China
China, Guangzhou
China, Guangzhou
China
China
China
Component: Main Hydraulic Variable Displacement Axial Piston Pump Assembly
Manufacturer Model / Series: Komatsu HPV95 / HPV132 Series Architecture
Komatsu OEM Part Numbers: 708-2L-00300, 708-2L-00112 (7082L00300, 7082L00112, 708-2L-31123)
Machine Compatibility:
Komatsu PC200-7 / PC200LC-7
Komatsu PC210-7 / PC210LC-7
Komatsu PC220-7 / PC220LC-7
Komatsu PC230-7 / PC230LC-7
Komatsu PC240-7 / PC240LC-7K
Komatsu PC270-7 / PC290NLC-7K
Condition: Genuine Refurbished / Remanufactured to Factory Tolerance OEM Specs
2. Technical Specifications
Pump Type: Dual Tandem Variable Displacement Swash Plate Piston Pump
Flow & Power Management: Integrated hydraulic TVC (Torque Variable Control) regulators to match hydraulic power demand directly with engine horsepower curves.
System Working Pressure: High-pressure rating engineered for main working circuits (up to 37.3 MPa / 380 bar with boost).
Direct Flywheel Drive: Heavy-duty input drive shaft designed for direct connection to the engine flywheel dampener coupling.
Auxiliary Pilot Circuit: Equipped with integrated pilot supply gear pump for pilot valve pressure control.
3. Critical Installation Requirements
Hydraulic Pump Housing Priming (Mandatory)
Before starting the excavator engine, you must manually pre-fill the pump casing with clean, fresh hydraulic oil through the highest case drain port. Running an axial piston pump dry for even a few seconds will cause immediate scoring on the valve plate, cylinder block, and piston slippers, leading to total pump destruction.
Air Bleeding & Startup Procedure
After mounting and priming, loosen the air bleed plug on top of the pump housing. Crank the engine over with the fuel shutoff engaged until smooth, bubble-free hydraulic oil flows out, then tighten the plug. Run the machine at low idle with no load for 10–15 minutes to allow trapped air to vent through the return circuit.
Complete Hydraulic System Decontamination
If replacing a pump that suffered catastrophic mechanical breakdown, you must completely drain and flush the main hydraulic reservoir, clean the oil cooler, and flush all main feed lines. Replace all main return and suction filter elements before starting the unit.
Pilot & PC/LS Valve Pressure Calibration
Check and confirm that the pilot circuit control pressure and electronic proportional valve inputs match factory specifications. Incorrect pilot signal inputs can cause engine stalling or sluggish implement response.
4. Frequently Asked Questions (FAQ)
Q: Are part numbers 708-2L-00300 and 708-2L-00112 interchangeable?
A: Yes. These part numbers represent standard Komatsu engineering revisions and supersessions across the Dash-7 excavator generation (PC200-7 through PC290-7). They share identical physical frame mounting dimensions, hose port locations, and internal displacement specs.
Q: What process is involved in "Genuine Refurbished" condition?
A: Remanufactured/refurbished units undergo complete disassembly, deep ultrasonic cleaning, and full replacement of high-wear internal components (including piston shoes, barrel plates, swash plate bearings, and shaft seals). Every pump is bench-tested on a hydraulic test stand to verify flow rate, pressure holding, and regulator control curves before shipment.
Q: My PC200-7 stalls the engine when lifting heavy loads or digging. Will replacing the hydraulic pump fix this?
A: Engine stalling under load typically points to malfunctioning pump regulators (PC/LS valves) failing to destroke the pump when hydraulic demand exceeds engine horsepower output. Installing a properly calibrated pump assembly restores balanced power distribution.
5. Shipping & Logistics
Packaging: Thoroughly coated with anti-corrosion preservation oil, fitted with heavy-duty port caps, and bolted securely inside a heavy-duty export wooden crate.
Transit Time: Global express air freight via DHL/FedEx/UPS typically delivers within 3 to 7 business days, or via ocean freight for larger freight needs.