Mori Seiki ZT1500YB machining centre
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 58...
Show
+49 162 5858448
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Location: AT
Counter Spindle: yes
Driven Tools: yes
Tool Stations: 12
Spindle Power: 18.5 kW
Head 1 Operating Time: 36,316 h
Head 1 Machining Time: 18,301 h
Head 2 Operating Time: 36,324 h
Head 2 Machining Time: 11,026 h
Turret Type: 12 stations [16 stations optional]
Number of Tools in Turret: 12 [16]
Shank Height for Square Tool: 20 mm
Shank Diameter for Boring Bar: 25 mm
Driven Tool Spindle 1 & 2 Speed: 6,000 rpm
Driven Tool Spindle 1 & 2 Capacity: Drill max. 13 mm diameter, Thread max. M12
Rapid Traverse Speed: X1, X2: 18,000 mm/min; Z1, Z2: 24,000 mm/min; Y: 6,000 mm/min; B: 24,000 mm/min
Jog Feedrate: X, Z, B: 0-1260 mm/min
Spindle Motor 1 & 2 (30 min / continuous): 22 / 18.5 kW
Driven Tool Drive Motor Spindle 1 & 2 (5 min / 15 min / continuous): 5.5 / 3.7 / 2.2 kW
Axis Motors: X1: 3 kW; X2: 2.5 kW; Z2: 3 kW; Y: 1.6 kW; B: 3 kW
Hydraulic Pump Motor: 0.75 kW
Lubricant Pump Motor: 0.02 kW
Coolant Pump Motor: 0.6 kW x 2, 1.2 kW x 1
Cooling Oil Pump Motor: Compressor: 0.65 kW; Lubricating pump: 0.4 kW; Blower: 0.045 kW
Required Power Supply: 63.37 kVA
Compressed Air Supply: 0.5 MPa, 100 L/min
Max. Workpiece Swing Diameter: 310 mm
Max. Distance Between Spindle Noses: 1000 mm
Max. Turning Diameter: 190 mm
Max. Turning Length: 235 mm
Standard Turning Diameter: 170 mm
Max. Bar Capacity: 65 mm
X-Axis Travel (Nr. 1 & Nr. 2): 140 mm
Spindle 2 Travel (B-Axis): 775 mm
Number of Spindle Speed Ranges: 1 step
Spindle Nose (Spindle 1 & 2): JIS A2-6
Spindle Speed Range (Spindle 1 & 2): 50-5000 rpm
Spindle Bore (Spindle 1 & 2): 73 mm
Min. Spindle Indexing Angle: 0.001°
Spindle Bearing Inner Diameter: 120 mm
Chuck (Spindle 1 & 2): 8" power chuck & hollow clamping chuck
Hydraulic Oil Tank Capacity: 10 L
Lubricant Tank Capacity: 6 L
Coolant Tank Capacity: 285 L
Oil Cooler Tank Capacity: 12 L
Floor Space (without chip conveyor): 3702 x 2066 mm
Phase: 3 Phase
Full Load Current: 182 A
Spindle Motor Current Rating: 122 A
Interrupting Capacity: 5 kA
Rated Power: 63 kVA
Y-axis travel: ±50 mm
Z-axis travel: Z1: 700 mm, Z2: 690 mm