New Metcor BS170G metal band saw
≈ €1,457
SIEDLCE
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
metcor@metcor.pl
+48 539 10...
Show
+48 539 109 640
+48 539 20...
Show
+48 539 200 102
Poland 
Poland, Siedlce
Poland, Siedlce
Poland, Sokołów Podlaski
Poland, Kruszwica
Poland, Tarnowskie Góry
Italy, Oderzo (TV)
Italy, Oderzo (TV)
Germany, Niederlangen
Italy, Oderzo (TV)
Italy, Oderzo (TV)
Italy, Oderzo (TV)
Germany, Niederlangen
Italy, Oderzo (TV)
Italy, Oderzo (TV)
Italy, Oderzo (TV)
Germany, Egenhofen
Germany, Egenhofen
The METCOR BS170G band saw, equipped with a hydraulic cylinder, cooling, and an arm that can be swiveled up to 60°, combined with blades from the renowned German company Rontgen, is widely used in metalworking shops where precision, quality, and cutting speed are essential. This horizontal metal band saw with a swiveling arm allows for cutting perpendicular to the axis of the material being cut and at any angle from 0° to 60°. The material to be cut can be fed manually or with any mechanical device, while the tool is fed by gravity using oil flow in a two-chamber hydraulic cylinder. The appropriate arm lowering speed is achieved by a valve regulating the oil flow between the chambers. The band guides are equipped with a set of rollers with bearings. This has a significant impact on band tracking, its service life, straightness, accuracy, and cut quality. The appropriate cutting speed should be selected for each type and grade of material. The rigid arm is made of profiled cast iron. A control panel is located next to the arm. Power from the electric motor to the blade drive wheel is transmitted via a motor with a mechanical (not belt) transmission. The blade is tensioned on two cast iron wheels using a manual tensioner and guided by a set of bearing rollers. The base is constructed as a rigid body welded from steel sheets. Inside, there is a separate coolant tank with an electric pump. The upper part of the base forms a basin for draining coolant and collecting chips generated during cutting. A cast iron worktable with a swivel arm and a control panel on a separate arm is attached to the base. During the cutting process, the main cutting movement is the advancement of the blade and the arm's downward movement. The arm's downward speed (cutting speed) is regulated by a hydraulic actuator. The feed rate is adjusted on the cutter's control panel. In the lower arm position (after cutting the material), the cutting band drive is automatically shut off. Safety is ensured by cutting band guards and microswitches that stop the motor after the cutting cycle ends or if any of the guards are opened. Additional safety features include automatic shutdown of the cutter if the cutting band breaks.