Schütte ADH 160 8-Spindel Futterautomat metal lathe
Hövelhof
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 5257 93...
Show
+49 5257 9383870
+49 5257 93...
Show
+49 5257 9383879
Germany 
Germany, Kaiserslautern
Germany, Wiefelstede
Germany, Wiesbaden
Germany, Weißenfels
Germany, Bruchsal
Germany, Bruchsal
Germany, Wiesbaden
Manufacturer: Schütte
Model: ADH 160
Machine No.: 225
Year of manufacture: 1981
Weight: 11 tonnes
General / technical data:
Max. turning length: 125 mm
Max. workpiece diameter: 168 mm
Max. drilling depth: 125 mm
Adjustable cycle time: from 3.4 to 450 sec.
Operating hours: 8,200 h
Work spindle speed: from 90 – 1,120 rpm
Footprint (L x W x H): approx. 4,730 x 1,700 x 2,120 mm
Power supply: 380 V / 50 Hz
Accessories:
7 cross slides
8 longitudinal slides
Thread cutting device
4 x 2-jaw chucks Ø 160 mm
Chuck type: Draw chuck with clamping diameter 15
Chuck model: Röhm 0W-406 682 Clamping force 1200 da N
4x 3-jaw chucks Ø160mm
Chuck type: Draw chuck with clamping diameter 15
Chuck model: Röhm 1W-406 681 Clamping force 1800 da N
Insertion arm over chuck 100 mm.
The workpiece is fed to the insertion arm by a swivel arm and rotary gripper.
Note:
The machine is in very good condition and has very few operating hours.
The machine is set up for crankshaft halves for small internal combustion engines.
-WKG 386-
Hersteller: Schütte
Type: ADH 160
Maschinen Nr.: 225
Baujahr: 1981
Gewicht: 11t
Allgemeines / technische Daten:
max. Drehlänge: 125mm
max. Werkstückdurchmesser: 168mm
max Bohrtiefe: 125mm
Einstellbare Stückzahl: von 3,4 bis 450 sec.
Betriebsstunden: 8.200h
Arbeitsspindel Drehzahl: von 90 – 1120 U/min
Aufstellfläche (l x b x h): ca. 4730 x 1700 x 2120mm
Stromversorgung: 380V / 50Hz
Zubehör:
7 Querschlitten
8 Längsschlitten
Gewindeschneidvorrichtung
4x 2-Backen Futter Ø160mm
Futterart: Zugfutter mit Spanndurchmesser 15
Futtertype: Röhm 0W-406 682 Spannkraft 1200 da N
4x 3-Backen Futter Ø160mm
Futterart: Zugfutter mit Spanndurchmesser 15
Futtertype: Röhm 1W-406 681 Spannkraft 1800 da N
Einlegearm über Futter 100mm.
Das Werkstück wird von einem Schwenkarm und Drehgreifer dem Einlegearm zugeführt.
Bemerkung:
Die Maschine ist sehr gut erhalten und hat sehr wenig Betriebsstunden.
Die Maschine ist eingerichtet auf Kurbelwellenhälften für Kleinverbrennungsmotoren.